Roll out telemetry across a mixed liquid cylinder fleet by grouping confirmed vessel and probe configurations, checking each site, and controlling every vessel reassignment. A model list alone is not enough: the operating record must connect the physical vessel, its monitoring equipment and the customer location.
Build the fleet register before choosing a batch
Start with a practical register maintained by the distributor. Give each vessel a clear physical identifier and record the monitoring module separately. Update the recorded location whenever a vessel moves.
| Register field | Purpose |
|---|---|
| Vessel identifier and model | Match the physical cylinder to its record |
| Gas, gauge and probe details | Prepare the compatibility review |
| Telemetry module identifier | Track which module is fitted to which vessel |
| Customer, site and normal position | Support assignment, access and connectivity checks |
| Optional equipment and handover status | Record pressure sensing, display choice and operating acceptance |
Use a controlled spreadsheet or another agreed record, with a named person responsible for updates. Reconcile it against vessel labels before preparing an installation batch.
Group vessels by confirmed compatibility
CryoFor TM2 replaces the electronic gauge head and reads a compatible capacitive level probe. Confirm the fitted probe and gauge configuration for each group rather than assuming that a shared manufacturer or similar appearance means compatibility.
Where pressure monitoring is required, include a separate pressure sensor in the review. Agree whether a local display is needed. Start with representative combinations of equipment and customer conditions, then expand after the installation and handover process works consistently. The liquid cylinder gauge retrofit guide provides a related starting point for the equipment discussion.
Plan vessel swaps as a controlled handover
Before a swap, record the outgoing and incoming vessel identifiers, their modules, the customer site and the responsible contacts. Establish which vessel the customer and dispatcher should monitor during the transition.
Update the agreed site assignment and user access when the vessel changes. Confirm customer consent for shared monitoring and keep different customers’ data separated. Check that notification recipients now relate to the correct vessel. Do not close the handover until the physical label and the monitoring record match.
Accept the operating arrangement at each site
Verify the installed vessel position and its connection through a 2.4 GHz Wi-Fi router to the cloud. Confirm a current reading and its time in the web console. Review the chosen notification arrangement and name the person who handles offline events.
Include local operating checks and refill contacts in the handover. If a vessel later moves to another normal position or customer site, repeat the relevant connection and assignment checks. Record completion rather than relying on memory between the warehouse, driver and dispatcher.
FAQ: Can one successful installation approve a whole model range?
No. Use it as evidence for the checked configuration, then confirm the probe, gauge and optional equipment on the remaining vessels. Keep exceptions visible in the register before scheduling them.
FAQ: Does moving a vessel complete its site reassignment?
No. Treat reassignment as a separate operating step: update the agreed records, check access and recipients, and verify the connection at the new position. Allocate this work to a named person in the swap procedure.
To plan a mixed-fleet rollout, send CryoFor your model and gauge list, available probe details, vessel and site counts, and normal swap pattern. Include any local-display or pressure-monitoring needs so the first installation groups can be reviewed together.